Heavy duty all hydraulically powered abrasive and/or chemical spreader for ice control, dust control, and seal coating.

The Warren AC-2420 can be either dump body or truck chassis mounted with a choice of either truck or auxiliary engine power.

• is designed to spread abrasives, chemicals, or mixtures of both for ice control; chemicals for dust control; and abrasives for seal coating.
• is ideal for the operator looking for a long life economical unit.

Body Construction

• All electrically welded ASTM-A1011 A-45 high tensile steel
• 3/16" sills which have integrally formed full length conveyor chain shield supports
• Sides and ends are inverted "J" formed for hopper strength and stiffness without corrosion pockets
• Sides are set at 45 degrees to provide easy material flow
• 3/16" conveyor bottom panel with rear belt wiper
• Four corner brace lifting eyes
• "Tapered-in" front and rear end gates for better material seal and reduced power requirement.

Conveyor

• Overall Width: 24"
• Conveying Width: 18" with a 12 "x18" maximum feedgate opening
• Pintle type conveyor chain with 7/16" hardened pins and 2 1/4" pitch
• 3/8" x 1 1/4" cross bars are welded to every other link
• Eight tooth steel sprockets mounted to 1 1/2" diameter idler shaft and 2" diameter drive shaft
• 4" chain idler adjustment with anti-friction bearings
• Rear belt type sprocket sealers and "bolt-in" conveyor chain shields.
• Hand crank type feedgate control

Conveyor Drive

• Heavy duty 6:1 reduction gearbox with 2" diameter drive shaft
• Gearbox housing of aluminum alloy with single "bolt" torque bracket mount for easy cleaning and maintenance
• Low speed high torque hydraulic motor is integrally mounted to conveyor gearbox

Spinner Assembly

• A single 22" diameter spinner with six formed replaceable fins
• Mounted to 1 1/4" dia. spinner shaft
• Vertically adjustable hopper assembly with 4 rod adjustable external baffles and 2 adjustable internal chute baffles
• Tilt-up spinner assembly for convenient storage

• Dump Body Mount Kit, Truck Chassis Mount Kit, Belt Over Chain Conveyor, 7" dia. Auger Conveyor, Automatic Ground Speed Control, Catwalks, Hopper Screens, Inverted “V” Shield, Side Extensions, Engine Drive, Stainless Steel Type 304, Spinner Extensions, Special Attachments or Modifications to Customer's Specs.